Ormond Beach Tree Stump Removal
Ormond Beach Tree Stump Removal

Ormond Beach tree stump removal is number one demanded service in around area. Especially due to the two giant hurricane hits Volusia county took in past year. These deadly hurricane’s Mathew and Irma not only destroyed cities around Volusia but complete destroyed many neighborhoods in Ormond Beach. Especially with many woods surrounding the areas the streets were piled up with broken woods, which left tremendous amount of tree stumps all over the place.

Ormond Beach Tree Stump Removal
Photo of the community residents back yard, after the huge hit of hurricane Irma!

The after effects of hurricane hits were terrible and left the city with giant tree-stumps all over the place. Many people who encountered the problem in their back or front yard, according to our survey searched for solution online and soon came to understanding that, either they messed up the removal process or were unable to do it at all.

With very few Ormond Beach tree stump removal companies around the place people were not able to remove the left over junk in time and had to wait for long time. This was a huge problem so it is a good idea to prepare by searching for Ormond Beach tree stump removal services now before another hurricane hits the city in future. Why? because to avoid the problem of removing your stump delayed. The delay might result in a very bad side effects.

Th Best Ways To Prepare Now For Hurricanes

The worst thing that people who live along coastlines can do is not to prepare for tropical storms and hurricanes.

According to the National Hurricane Center, the two key factors contributing to weather safety during hurricanes are preparing in advance for the risks and to act on those preparations when alerted by emergency officials.

hurricane WARNING
The best way to prepare for future hurricane

Evacuation planning

The main reason people have to evacuate during hurricanes is from a storm surge, which is an abnormal rise of water generated by a storm’s winds that can reach heights well over 20 feet and can span hundreds of miles of coastlines, according to the National Hurricane Center.

Buy supplies

The most important thing that both Knabb and Kottlowski stressed was buying supplies well in advance and keeping those supplies on hand should evacuation be required.

Check insurance coverage

Property owners and renters should be sure to insure their homes against flooding, something that Knabb said many people do not realize is not a part of standard home and renters insurance.

Tenants and home owners can contact their renters or home insurance provider to buy flood insurance, and they should do so even if they do not live right along the coastline.

Make copies of important documents

Those living in or near hurricane areas should make copies of proof of ownership documents of any property not limited to their homes, cars and boats.

These documents can be stored in the hurricane kit or in any safe location that does not risk being damaged during the hurricane.

Protect your home

Residents and tenants should inspect their homes to confirm that there is no damage that a hurricane could increase.

Any issues with the overall structure should be repaired, including loose shingles or damaged roofs.

Back up your electronics

Aside from keeping extra batteries and chargers around during a hurricane, people are also encouraged to backup any electronic devices.

Knabb said data should be stored at an off-site location so that data can be recovered if something were to happen to the physical computer or device during a hurricane.

Businesses should take particular caution in backing up information and sending that information to a remote site.

If you would like to remove the stumps your self before calling the Ormond Beach tree stump removal company, here is our quick comprehensive guide you can use in your advantage.

Ormond Beach tree stump removal guide

  • Tools & Materials
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Corded drill
  • 12 in. bit extension
  • Extension cord
  • Safety glasses

You can use a drill/driver instead of a corded drill. A 1 in. spade bit is recommended, but you can use a slightly larger or smaller one, if that’s all you have

Drill holes in the stump

Cut off as much of the top of the stump as possible. Using a 1-in. spade bit with a spade bit extension, drill 1-in. holes around the perimeter of the stump about 12 in. deep and 3 to 4 in. back from the edge. Drill more holes 3 to 4 in. down from the rim at a 45-degree angle to connect with the other holes. They’ll provide vent holes for burning or help the rotting process.

You can remove a stump by renting a power stump grinder, but another way is to buy a can of stump remover (available at most garden or home centers). Most brands are made of powdered potassium nitrate, which speeds up the rotting process. You simply pour the granules into drilled holes and fill the holes with water. The stump will become pretty spongy after four to six weeks. Keep kids and pets away. Then you can break out the rotten wood with an ax.

For a completely labor-free removal, the manufacturers of stump remover suggest burning out what’s left of the stump by pouring kerosene or fuel oil (never gasoline) into the holes. Wait until the liquid completely penetrates the wood (this could take a few weeks). Then drop a match into the holes to start the burning process. The stump will smolder for days, eventually leaving a charcoal-filled hole. It’s dangerous having a giant, smoldering ember in your yard, so some precautions are in order. Envelop the stump in chicken wire, remove all leaves from the vicinity before ignition and keep an eye on it!

We suggest the ax method for finishing the job. Stump removers work only on seasoned (older) stumps that have been dead for a year or so, not freshly cut tree stumps.

Pour stump remover in the holes

Pour 3 to 4 oz. of stump remover chemical into each of the holes and fill them with water. The process takes four to six weeks.

You can remove a stump by renting a power stump grinder, but another way is to buy a can of stump remover (available at most garden or home centers). Most brands are made of powdered potassium nitrate, which speeds up the rotting process. You simply pour the granules into drilled holes and fill the holes with water. The stump will become pretty spongy after four to six weeks. Keep kids and pets away. Then you can break out the rotten wood with an ax.

For a completely labor-free removal, the manufacturers of stump remover suggest burning out what’s left of the stump by pouring kerosene or fuel oil (never gasoline) into the holes. Wait until the liquid completely penetrates the wood (this could take a few weeks). Then drop a match into the holes to start the burning process. The stump will smolder for days, eventually leaving a charcoal-filled hole. It’s dangerous having a giant, smoldering ember in your yard, so some precautions are in order. Envelop the stump in chicken wire, remove all leaves from the vicinity before ignition and keep an eye on it!

We suggest the ax method for finishing the job. Stump removers work only on seasoned (older) stumps that have been dead for a year or so, not freshly cut tree stumps.

Ormond Beach Tree Stump Removal. If you need more information on how to remove a tree stump check out this Tree Stump removal guide

LEAVE A REPLY

Please enter your comment!
Please enter your name here